Specifications
Type: High-Performance Midbass Driver
Series: Diamond Audio Motorsport NEO Series
Size: 8-inch (203mm)
Configuration: Single Midbass Driver
Power Handling (RMS): 350W
Power Handling (Peak): 700W
Impedance: 4Ω
Sensitivity (1W/1m): 96dB
Frequency Response: 60Hz – 5kHz
Voice Coil: 1.5-inch (38mm) High-Temperature Copper
Magnet Structure: Lightweight High-Flux Neodymium Motor
Cone Material: Non-Pressed Paper Cone with Resin Damping Treatment
Surround: Cloth Accordion Edge
Basket: Cast Aluminum Frame with Vented Design
Cooling System: Rear-Vented Pole Piece for Thermal Stability
Terminals: Nickel-Plated Spring-Loaded Push Terminals
Mounting Depth: 3.3" (84mm)
Mounting Cutout: 7.1" (180mm)
Overall Diameter: 8.2" (208mm)
Weight: 3.9 lbs (Each)
Warranty: 1-Year Manufacturer Warranty
Performance Specs
• High-efficiency 8" midbass driver built for aggressive output and low-end punch.
• Neodymium motor reduces weight while maintaining exceptional magnetic control.
• Designed for motorcycles, UTVs, and marine systems where output and clarity are critical.
• Stiff, resin-coated paper cone provides natural tonality and deep midbass performance.
• Handles continuous high power with minimal compression or distortion.
Key Features
• Lightweight Neodymium Magnet – Superior power-to-weight ratio and magnetic efficiency.
• Paper Cone Design – Delivers rich, warm tone with accurate transient response.
• Cloth Accordion Surround – Ensures control and precision under high excursion.
• Cast Aluminum Frame – Prevents flexing and enhances heat dissipation.
• High-Temperature Voice Coil – Maintains stability under extreme power loads.
• Vented Motor Design – Promotes consistent cooling and prevents thermal compression.
• Diamond Audio Engineering – Optimized for precision, volume, and outdoor endurance.
Performance Integration Notes
• Ideal Pairing: Diamond HXM800.4D, DES400.2D, or DXM800.4D Amplifiers (125–200W RMS @ 4Ω).
• System Compatibility: Motorcycle, UTV, Marine, or Custom High-SPL Installations.
• Recommended Use: Dedicated midbass reinforcement in front-stage or saddlebag systems.
• Installation Location: Enclosed pods, saddlebag lids, or vented baffles.
• Installation Time: Approx. 45–60 minutes.
• Pro Tip: For best output, use a high-pass filter at 60–80Hz and low-pass at 3–5kHz (12dB/Octave). Combine with compression horns for seamless mid-to-high integration.
