Custom Event Setup

×

Click on the elements you want to track as custom events. Selected elements will appear in the list below.

Selected Elements (0)
    Skip to content
    Zapco - ADSP-Z8 IV-6AT - 8-Ch. DSP/6-Ch. Amp. + 2 RCA Out Power 2Ω: 6 x 120W, 4Ω: 6 x 80W

    Zapco - ADSP-Z8 IV-6AT - 8-Ch. DSP/6-Ch. Amp. + 2 RCA Out Power 2Ω: 6 x 120W, 4Ω: 6 x 80W

    by Zapco
    Sold out
    $1,388.89 - $1,388.89
    $1,388.89
    $1,388.89 - $1,388.89
    $1,388.89

     • DSP Processor: Cirrus Logic CS47048
    • DSP Power: 150 MHz / 32-bit / 192 kHz
    • Input / ADC: 8 channels
    • ADC Dynamic Range / THD: 108 dB / –98 dB
    • DAC: Cirrus Logic CS8422, 24-bit / 192 kHz
    • DAC Dynamic Range / THD: 140 dB / –120 dB
    • Low-level input sensitivity: 1 – 5 V RMS
    • High-level (speaker input) sensitivity: 2 – 20 V
    • Digital Inputs: Optical (24-bit / 192 kHz), Coaxial (24-bit / 192 kHz)
    • Frequency Response: 10 Hz – 22.5 kHz (–3 dB)
    • Signal-to-Noise Ratio:
     – DSP Input: 110 dBA (digital) / 106 dBA (analog)
     – Amplifier + DSP (max power): 95 dBA
    • THD + N (Input): 0.002% (digital) / 0.005% (analog)
    • THD + N (Amplifier + DSP w/ analog input): 0.07%
    • Crosstalk:
     – DSP only: 90 dB @ 1 kHz
     – Amplifier + DSP: 45 dB @ 1 kHz
    • Amplifier Output (Continuous / RMS):
     – 6 × 120 W @ 2 Ω
     – 6 × 80 W @ 4 Ω
     – Bridged (4 Ω): 3 × 240 W
    • Equalization & Filters:
     – Front/Rear EQ (Channels 1–6): Graphic & Parametric, 31 bands
     – Effect EQ (Channels 7–8): Graphic & Parametric, 11 bands
    • Time Alignment / Delay: 0 – 15 ms range, steps of 0.02 ms
    • Maximum Delay: 515 cm, 0.68 cm steps
    • Phase Polarity: 0° / 180° selectable per channel
    • Mute / Solo: Supported on each channel
    • Remote Control: Included
    • Bluetooth Streaming: Supported via optional HD-BT II-D module
    • Dimensions: 213 mm (W) × 222 mm (L) × 50 mm (H)